Machine Tools Accessories

Carbide Scribers

  • For use on Hard Surfaces
  • 6” (150 mm) Long, Provided with Clip
Cat. No. Description
CS-3155 Carbide Scriber in Steel Body.

Drill Sleeves

Features:

  • Hardened A Grade Type - Acc DIN 2185 is made from external and Internal Ground Carbon Steel.
  • Workshop grade is made from external Ground and Internal reamed Carbon Steel.
Specifications:
Cat No. Workshop Grade  Cat No. Handed A Grade Morse Taper Inside Morse Taper Outside Overall Length MM
DS-1300 DS-1312 1 2 92
DS-1301 DS-1313 1 3 99
DS-1302 DS-1314 1 4 124
DS-1303 DS-1315 1 5 171
DS-1304 DS-1316 2 3 121
DS-1305 DS-1317 2 4 124
DS-1306 DS-1318 2 5 156
DS-1307 DS-1319 3 4 140
DS-1308 DS-1320 3 5 156
DS-1309 DS-1321 4 5 171
DS-1310 DS-1322 4 6 218
DS-1311 DS-1323 5 6 218

Additional Information:
  • Item Code: DS

Vernier Calipers

  • Handy tool for Inside, Outside and depth measurement.
  • Columbus Type features Thumb controlled movement with locking device.
  • Precision Type features a Thumb controlled ball movement and is Nickel Plated.
  • Graduated in both mm and Inch size.
Cat No.

Range

Description
Inch mm
VC-3160 0-5 0-125 Columbus Type
VC-3161 0-6 0-150 Precision Type

Extension Sockets

Features:

  • Precision Ground internally and externally.
  • Made of high quality tool steel.

Specifications:
Cat No. Soft Type 
Cat NO. Hardened
 
Morse Taper Hole
 
Morse Taper Shank
ES-1330ES-135411
ES-1331ES-135512
ES-1332ES-135613
ES-1333ES-135714
ES-1334ES-135815
ES-1335ES-135921
ES-1336ES-136022
ES-1337ES-136123
ES-1338ES-136224
ES-1339ES-136325
ES-1340ES-136432
ES-1341ES-136533
ES-1342ES-136634
ES-1343ES-136735
ES-1344ES-136842
ES-1345ES-136943
ES-1346ES-137044
ES-1347ES-137145
ES-1348ES-137246
ES-1349ES-137353
ES-1350ES-137454
ES-1351ES-137555
ES-1352ES-137656
ES-1353ES-137766

Additional Information:
  • Item Code: ES

Drill Drifts

Specifications:
Cat No.  Draft No. Fits NO. Sockets and Sleeeves
DD-1400 1 MT-1
DD-1401 2 MT-2
DD-1402 3 MT-3
DD-1403 4 MT-4-5-6

Additional Information:
  • Item Code: DD

Drill Chuck Arbor

Features:

  • Precision Ground to Master Gauges.
  • Made of high quality tool steel.
  • Guaranteed finest Possible accuracy and fit.
  • Individually Packed.
Specifications:
Cat No. Morse Shank Jacob Back
DA-1410 0 0
DA-1411 0 1
DA-1412 0 2
DA-1413 0 3
DA-1414 0 6
DA-1415 0 33
DA-1416 1 0
DA-1417 1 1
DA-1418 1 2
DA-1419 1 3
DA-1420 1 4
DA-1421 1 5
DA-1422 1 6
DA-1423 1 33
DA-1424 2 0
DA-1425 2 1
DA-1426 2 2
DA-1427 2 3
DA-1428 2 4
DA-1429 2 5
DA-1430 2 6
DA-1431 2 33
DA-1432 3 1
DA-1433 3 2
DA-1434 3 3
DA-1435 3 4
DA-1436 3 5
DA-1437 3 6
DA-1438 3 33
DA-1439 4 2

Additional Information:
  • Item Code: DA

Straight Shank Arbor

Specifications:
Cat No.  
Shank Diameter
Shank Length  
Jacob Taper
SA-1480 3/8” 2-1/2” 0
SA-1481 3/8’ 2-1/2” 1
SA-1482 3/8” 2-1/2” 2
SA-1483 1/2” 2-1/2” 0
SA-1484 1/2” 2-1/2” 1
SA-1485 1/2” 2-1/2” 2
SA-1486 1/2” 2-1/2” 3
SA-1487 1/2” 2-1/2” 4
SA-1488 1/2” 2-1/2” 6
SA-1489 1/2” 2-1/2” 33
SA-1490 5/8” 2-1/2” 0
SA-1491 5/8” 2-1/2” 1
SA-1492 5/8” 2-1/2” 2
SA-1493 5/8” 2-1/2” 3
SA-1494 5/8” 2-1/2” 4
SA-1495 5/8” 2-1/2” 6
SA-1496 5/8” 2-1/2” 33
SA-1497 3/4” 3” 0
SA-1498 3/4” 3” 1
SA-1499 3/4” 3” 2

Additional Information:
  • Item Code: SA

Threaded Arbors

Specifications:
Cat No. Shank Size Thread
TA-1530 Morse Taper No. 3 3/8 – 24
TA-1531 Morse Taper No. 3 1/2 – 20
TA-1532 Morse Taper No. 3 05/08/16
TA-1533 Morse Taper No. 2 03/08/24
TA-1534 Morse Taper No. 2 01/02/20
TA-1535 Morse Taper No. 2 05/08/16
TA-1536 Morse Taper No. 1 03/08/24
TA-1537 Morse Taper No. 1 01/02/20
TA-1538 1/2” Straight 01/02/20
TA-1539 1/2” Straight 03/08/24

Additional Information:
  • Item Code: TA

Blank Arbors

Specifications:
Cat No. Shank Taper
BA-1550 Morse Taper 1
BA-1551 Morse Taper 2
BA-1552 Morse Taper 3
BA-1553 Morse Taper 4

Additional Information:
  • Item Code: BA

R-8 Drill Chuck Arbors

Freatures:

  • Precision Ground
  • Guaranteed Finest Possible accuracy and fit.
  • Individually packed

Specifications:

Cat No.  No. To Fit Drill Chuck With Female Taper
DA-1560 R8-1 1
DA-1561 R8-2 2
DA-1562 R8-3 3
DA-1563 R8-4 4
DA-1564 R8-6 6
DA-1565 R8-33 33

Boring Heads

Freatures:

  • Machined from High grade steel with tool blocks hardened and ground.
  • Ideal for mill or Jig bore operations.
  • Non-Reflecting Satin Chrome Body allows easy reading and adjustment.
  • Threaded back for interchangeable Shanks.
Specifications:
Cat. No. Cat No. With R-8 Shank Head Diameter Thread
Size
Overall Length Max off Set Canter Distance B/W Holes Cross Vertical Hole Size
BH-1570 BH-1574 2” 7/8” x 20 2-13/32” 5/8” 5/8” 1/2”
BH-1571 BH-1575 2” 1-1/2” x 18 2-13/32” 5/8” 5/8” 1/2”
BH-1572 BH-1576 3” 1-1/2” x 18 3-5/32” 1” 15/16” 3/4”
BH-1573 BH-1577 4” 1-1/2” x 18 3-3/4” 1-5/8” 1-1/4” 1”

Additional Information:
  • Item Code: BH

Threaded Shanks for Boring

Specifications:
Shank Type Cat No. for Thread Size
7/8"-20 1-1/2"-18
R-8 BS-1590 BS-1599
MT-2 BS-1591 BS-1600
MT-3 BS-1592 BS-1601
MT-4 BS-1593 BS-1602
1/2” St BS-1594 BS-1603
3/4” St BS-1595 BS-1604
1” St BS-1596 BS-1605
1-1/4 St BS-1597 BS-1606
1-1/2 St BS-1598 BS-1607

Additional Information:
  • Item Code: BS

Integrated R-8 Shank Boring Head

Features:

  • Integrated Shank for maximum rigidity.
  • Hardened and Ground body.
  • Black oxidised finish.
  • Cross and Vertical Hole dia 1/2" .
  • Offset travel 3/4".

Specifications:

Cat No.  Head Diameter Overall Length Graduations
BH-1610 2-1/2” 7-3/16” .0005”

Dead Centers

Features:

  • 60° included Point angle full lathe center.
  • Precision ground and Hardened.
  • Carbide tipped centers gives longer tool life and offer more wear resistance in both turning or grinding applications thus reducing costs.

Specifications:

Carbon Steel Cat. No. Carbide Tipped Cat NO. Morse Taper Overall Length
Inch mm
DC-1680 DC-1687 MT 0 02/07/08 73
DC-1681 DC-1688 MT 1 03/05/16 84
DC-1682 DC-1689 MT 2 04/03/16 104
DC-1683 DC-1690 MT 3 05/01/04 133
DC-1684 DC-1691 MT 4 06/01/02 165
DC-1685 DC-1692 MT 5 8 203
DC-1686 DC-1693 MT 6 10/05/08 270

Additional Information:
  • Item Code: DC

Sheet Metal Cutter

Features:

  • Smooth Ratcheting action.
  • Can be used for curved, straight & internal angle cutting.
  • Super hardened edge on bottom wheel.
  • Base mountable on work bench.


Additional Information:
  • Item Code: SM

Half Lathe Centers

Features:

  • 60° Included Point Angle Half Center.
  • Precision ground and Hardened.

Specifications:

Carbon Steel Cat. No.  
Carbide Tipped Cat NO.
 
Morse Taper
 
Overall Length
Inch mm
LC-1700 LC-1705 MT 1 03/05/16 84
LC-1701 LC-1706 MT 2 04/03/16 104
LC-1702 LC-1707 MT 3 05/01/04 133
LC-1703 LC-1708 MT 4 06/01/02 165
LC-1704 LC-1709 MT 5 8 203

Additional Information:
  • Item Code: LC

Eco Live Centers (Dual Bearing)

Features:

  • Made of Hardened and Ground high Carbon Steel.
  • Hardness 55 to 62 HRC.
  • Consists of two 'anti-friction' Bearings.
  • Single Row Deep groove ball bearing and Taper Roller bearing to absorb combined radial and thrust loads.
  • Maximum speed capacity upto 2000 RPM

Specifications:

Cat No.  Morse Taper Body Diameter D Point Diameter D Overall Length
Inch mm Inch mm Inch mm
LC-1720 MT 1 01/05/16 34 11/16/13 18 04/03/04 120
LC-1721 MT 2 2 50 27/32 21 05/07/08 148
LC-1722 MT 3 02/05/16 60 15/16 24 07/01/04 185
LC-1723 MT 4 02/01/02 63 01/01/08 28 08/05/08 220
LC-1724 MT 5 3 75 01/01/02 36 10/01/04 260
LC-1725 MT 6 4 100 02/01/08 53 14 355

Live Centers

Features:

  • Designed to hold pipe and hollow work.
  • Preloaded bearings to achieve good thrust and radial Capacities.
  • Head made from Heat treated hardened high Carbon Alloy steel

Specifications:
Cat No. Morse  Taper Size Head Dia D Total Length A Head Length a1 Nose Length a2 Nose Dia d Angle E
Inch mm Inch mm Inch mm Inch mm Inch mm
LC-1730 MT 2 2.48 63 5.37 136 2.48 63 1.42 36 0.46 11.7 70°
LC-1731 MT 3 3.07 78 6.77 172 3.03 77 1.65 42  0.71 18 70°
LC-1732 MT 4 5.04 128 7.62 193 3.07 78 2.45 62 1.38 35 75°
LC-1733 MT 5 5.8 147 9.6 243 4.125 104 2.9 73 1.38 35 75°

Live Centers (Triple Bearing)

Features:

  • Consists of Three anti-friction Steel bearings Lubricated and Protected against contaminants and coolants.
  • Two deep groove ball bearing and one Taper Roller bearing for combined loads.
  • Hardened and Ground (60-62 HRC) Steel with 60° tip angle.
  • Knurled body for a firm grip.
  • Run out within .0002" (.005 mm).
  • Bearings are Pre-loaded and pressed to avoid starting loads.


Specifications:

Cat No. Morse Taper Body Diameter Point Diameter Overall Length
Inch mm Inch mm
LC-1740 MT 1 01/05/16 34 11/16/13 18 04/03/04 120
LC-1741 MT 2 2 50 27/32 21 05/07/08 148
LC-1742 MT 3 02/05/16 60 15/16 24 07/01/04 185
LC-1743 MT 4 02/01/02 63 01/01/08 28 08/05/08 220
LC-1744 MT 5 3 75 01/01/02 36 10/01/04 260
LC-1745 MT 6 4 100 02/01/08 53 14 355

Lathe Dogs

Features:
  • Manufactured from high Grade Iron.
  • Provided with Square Head Screw.
  • Available in both straight and Bent Styles.
  • Sizes above and including 4" are fitted with two screws instead of one

Specifications:

Cat No. Straight Type Cat No. Bent type Capacity
Inch mm
LD-1750 LD-1600 01/02/13 12
LD-1751 LD-1601 03/04/13 20
LD-1752 LD-1602 1 25
LD-1753 LD-1603 01/01/04 30
LD-1754 LD-1604 01/01/02 38
LD-1755 LD-1605 01/03/04 45
LD-1756 LD-1606 2 50
LD-1757 LD-1607 02/01/02 65
LD-1758 LD-1608 3 75
LD-1759 LD-1609 4 100
LD-1760 LD-1610 5 125
LD-1761 LD-1611 6 150

Additional Information:
  • Item Code: LD

Grinding Carriers

Features:
  • Carriers for Grinding Machines and light Lathes.
  • Made of malleable Iron.
  • Shiny black finish.


Specifications:

 

Cat No. Capacity
Inch mm
GC-1770 01/04/13 6
GC-1771 03/08/13 9
GC-1772 01/02/13 12
GC-1773 05/08/13 16
GC-1774 03/04/13 19
GC-1775 1 25
GC-1776 01/01/04 30
GC-1777 01/01/02 38
GC-1778 01/03/04 45
GC-1779 2 50
GC-1780 02/01/02 65
GC-1781 3 75
GC-1782 03/01/02 90
GC-1783 4 100

 


Additional Information:
  • Item Code: GC

Tool Makers Parallel Clamp

Features:
  • Features Hardened and Tempered Jaws
  • Clamps equipped with spring screw clip.
  • Highly useful for holding small work together,when drilling, welding, assembling, etc.

Specifications:

Cat No. Jaw Length  
Jaw Opening
Inch mm Inch mm
PC-1790 2 50 01/01/04 31
PC-1791 02/01/02 60 01/03/04 44
PC-1792 3 75 02/01/04 57
PC-1793 4 100 02/03/04 70
PC-1794 5 125 03/01/02 89
PC-1795 6 150 04/01/02 114
PC-1796 8 200 6 150

Lathe Chuck Keys

Features:
  • Hardened and Tempered.
  • Black Finish.


Specifications:

 

Cat No. Size of Square
Inch mm
LK-1810 15/64 6
LK-1811 09/01/32 7
LK-1812 15/32 12
LK-1813 01/04/13 6.35
LK-1814 05/16/13 8
LK-1815 03/08/13 9.5
LK-1816 07/16/13 11.2
LK-1817 01/02/13 12.7
LK-1818 09/16/13 14.3
LK-1819 05/08/13 16
LK-1820 11/16/13 17.5
LK-1821 03/04/13 19
LK-1822 1 25.4

Additional Information:
  • Item Code: LK

Machinist Jack

Features:

  • Made of Heavy Cast Steel.
  • Adjustable Screw and tilting Swivel head.
  • Has One inch (25 mm) adjustment.
  • A shop tool with hundreds of uses.

Hand Shear Machine

Features:

  • Ideal Machine for shearing sheet, steel, bars and rods.
  • Hardened and Tempered replaceable blades.
  • Long handles provides plenty of shearing torque.
  • Comes with predrilled holes to bolt down to work bench.
  • Spare blades are also available.
  • Available in lever type and Gear Type.

Specifications:
Cat No. Leaver Type Cat No Spare Blades Cat NO. Gear type  Blade Length
Inch mm
SM-1840 SM-1850 SM-1860 6 150
SM-1841 SM-1851 SM-1861 8 200
SM-1842 SM-1852 SM-1862 10 250
SM-1843 SM-1853 SM-1863 12 300

T-Slot Cleane

Features:

  • Widely used product.
  • Every Machine and Machinist needs one.
  • 5-1/8" (130 mm) long and 1-1/4" (32 mm) wide.
  • Black Shiny Finish.

Additional Information:
  • Item Code: TC

Magnetic Adjustable Links

Approx Price: Rs 1,800 / Piece 
Minimum Order Quantity: 50 Piece
Adjustable Magnetic Welding Link is ideal for welding, brazing and soldering. It eliminates the need for clamps or temporary fasteners.

• Widely used for Holding and Welding. 
• Can be set at any angle by adjustment and locking of wing nut. 
• Compact in size for holding work in confined spaces. 
• Each Block is 2” x 1” x 1”. 
• Overall Length 4-1/2” and Overall Width 2”.
• Available with ferrite or alnico (for higher temperatures) magnet materials .
Looking for Machine Tools Accessories ?
© J. K. Industrial Corporation
 
Desktop Site Back to top