Center Punches

Automatic Center Punch

Features:

  • Fully Hardened and Ground Punch Point.
  • Heavy Knurled Body for definite grip and easy handling.
  • No Hammer is required for operating punch.
  • Force of Impact can be regulated by rotating top Knurled cap.
  • 5” (125 mm) long with Body Diameter of  5/8” (16 mm).

Specifications:
Cat No. Type
CP-2985 Automatic Center Punch (Brass Body)
CP-2986 Automatic Center Punch (Steel Body)

Brass Punches (non Sparking)

Features:

  • Made from high quality Brass Hexagonal Stock.
  • Ideal Punches for working in no spark situation.
  • Punch Diameters are undersized app. .005” (0.127 mm)
  • 3-1/2” (90 mm) Long.
  • Available in individual sizes and also in a set of 8 Punches in attractive Plastic Pouch.

Specifications:
Cat No. Size of Tip
Inch mm
BP-2990 01/16/13 1.5
BP-2991 03/01/32 2.5
BP-2992 01/08/13 3
BP-2993 05/01/32 4
BP-2994 03/16/13 5
BP-2995 07/01/32 5.5
BP-2996 01/04/13 6
BP-2997 05/16/13 8
BP-2998 Set of above 8 Brass Punches

Center Punches (round Head)

Features:

  • Made of Tool steel, Hardened and Tempered. Points are Machined and Ground.

  • Heavy Knurled Body for better grip.

  • Shiny Black finish.

  • Available in individual sizes and alsoin a set of five in attractive plastic pouch.

Specifications:
Cat No. Diameter at Top of Taper Length
Inch mm Inch mm
CP-2940 01/16/13 1.6 3 75
CP-2941 05/01/64 2 4 100
CP-2942 03/01/32 2.5 4 100
CP-2943 09/01/64 3.6 4 100
CP-2944 05/01/32 4 4 100
CP-2945 (1.6 mm), 5/64” (2.0 mm), 3/32” (2.4 mm), 9/64” (3.6 mm) and 5/32” (4.0 mm)

Center Punches (square Head)

Features:

  • Made of Tool Steel, Hardened and Tempered.
  • Points are Machined and Ground.
  • Heavy Knurled Body for better Grip.
  • Available individually and in Sets

Specifications:

Cat No. Diameter at top of Taper Length Square size
Inch mm Inch mm Inch mm
CP-2950 01/16/13 1.6 4 100 03/08/13 9.5
CP-2951 05/01/64 2 4 100 03/08/13 9.5
CP-2952 03/01/32 2.5 4 100 03/08/13 9.5
CP-2953 09/01/64 3.6 4 100 03/08/13 9.5
CP-2954 05/01/32 4 4 100 03/08/13 9.5
CP-2955 Set of Five above sizes of Center Punches in Pouch.

Long Drive Pin Punch set

Features:

  • Single piece made from Hardened and Tempered Tool steel.
  • Tip Hardened to 45-52 HRC.
  • Striking head and front taper centerless ground.
  • Heavy Knurled finger grip
  • Shiny black oxidized finish.
  • Available in individual sizes and also in set of 4 & 8 attractive plastic case.

Specifications:
Cat No. Punch Diameter
Inch mm
PP-2900 01/16/13 1.6
PP-2901 03/01/32 2.4
PP-2902 01/08/13 3.2
PP-2903 05/01/32 4
PP-2904 03/16/13 4.8
PP-2905 07/01/32 5.5
PP-2906 01/04/13 6.4
PP-2907 05/16/13 8
PP-2908 4 pc Set of Drive Pin Punches 1/16” (1.6 mm), 3/32” (2.4 mm), 1/8” (3.2 mm) and 5/32”(4.00 mm), in a Plastic Pouch.
PP-2909 4 pc Set of Drive Pin Punches 3/16” (4.8 mm), 7/32” (5.5 mm), 1/4” (6.4 mm) and 5/16”
PP-2910 8 PC Set of Drive Pin Punches 1/16” (1.6 mm), 3/32” (2.4 mm), 1/8” (3.2 mm), 5/32” (4.0 mm), 3/16” (4.8 mm), 7/32” (5.5 mm),1/4” (6.4 mm) and 5/16” (8.0 mm) in a Plastic Pouch.

Hollow (leather) Punches

Features:

  • Excellent tool to punch Accurate Hole in gasket Material, light gauge sheet metal, Vinyl, Plastic, Leather, and more.
  • Made from hardened & tempered high Carbon Steel.
  • Precision Ground edges facilitates easy cutting.
  • Inside taper for clearance.
  • Sets are in an attractive Plastic Pouch.   
  • Also available in individual sizes.

 

Specifications:

 

Cat No. Range No. of PCs
HP-3020  3/16”, 1/4”, 5/16”, 3/8”, 7/16”and ½” 6
HP-3021 3/32”, 1/8”, 5/32”, 3/16”,1/4”,5/16”, 3/8”, 7/16” and 1/2” 9
HP-3022 2mm,, 3mm, 4mm, 5mm, 6mm, 7mm and 8 mm 7
HP-3023 2mm,, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm and 10 mm 9

Letter and Number Punch Set

Approx Price: Rs 195 / Set 
Features:

  • Made from high quality Carbon Steel.

  • Induction hardened to give a Solid Impression.

  • Shiny Black oxidized finish.
  • Numbers consist of 9 Stamps 0 - 8, No. 6 is inverted to make No. 9.
  • Letters consist of 27 PCs A to Z and  & Combination Set consist of 36 Stamps  (27 Letters and 9 Numbers).

Specifications:

Cat No. for 27 Stamps Letter Set  Cat No. for9 Stamps Number Set Cat No. for 36 Stamps Combination of  Letter & Number Sets Size of Character
Inch mm
LS-3040 FS-3055 LNS-3070 01/16/13 1.5
LS-3041 FS-3056 LNS-3071 03/01/32 2.5
LS-3042 FS-3057 LNS-3072 01/08/13 3
LS-3043 FS-3058 LNS-3073 05/01/32 4
LS-3044 FS-3059 LNS-3074 03/16/13 5
LS-3045 FS-3060 LNS-3075 01/04/13 6
LS-3046 FS-3061  LNS-3076 05/16/13 8
LS-3047 FS-3062 LNS-3077 03/08/13 10
LS-3048 FS-3063 LNS-3078 01/02/13 12

8" Long Drive Pin Punch Set

Features:

  • Tip Hardened to HRC 45-52.
  • Punch Section is Centerless ground to check runout.
  • Heavy knurled body with shiny black oxidized finish.
  • Body Length 4-1/2” and Pin Length 3-1/2” .

Specifications:

Cat No. Punch Diameter
Inch mm
PP-2920 01/08/13 3
PP-2921 03/16/13 5
PP-2922 01/04/13 6
PP-2923 05/16/13 8
PP-2924 03/08/13 10
PP-2925 5pc set in inch 1/8" - 3/8" (3mm to 10mm). Available in plastic pouch and bristel packing.

Nail Punches (round Head)

Features:

  • Hardened and Tempered Tool Steel for long life.
  • Shiny Black oxidized finish.
  • Heavy Knurled Body for better Grip.
  • Very Handy Tool for Carpenters, Model Makers, Machinists, Pattern Makers, etc

Specifications:

Cat No. Size of Tip Length
Inch mm Inch mm
NP-2960 01/16/13 1.6 4 100
NP-2961 03/01/32 2.5 4 100
NP-2962 01/08/13 3.2 4 100
NP-2963 05/01/32 4 4 100
NP-2964 03/16/13 4.8 4 100
NP-2965 Set of 5 above mentioned Nail Punches in a attractive Plastic

Nail Punches (square Head)

Features:

  • Made of Tool Steel, Hardened and Tempered.
  • Heavy Knurled Body for better grip.
  • Shiny Black Finish.
  • Handy Tool for Carpenters, Model Makers, Machinists etc.
  • Available in individual sizes and also in a set of Five in attractive Plastic Pouch.

Specifications:
Cat No. Size of Tip Length Square size
Inch mm Inch mm Inch mm
NP-2970 01/16/13 1.6 4 100 03/08/13 9.5
NP-2971 03/01/32 2.5 4 100 03/08/13 9.5
NP-2972 01/08/13 3.2 4 100 03/08/13 9.5
NP-2973 05/01/32 4 4 100 03/08/13 9.5
NP-2974 03/16/13 4.8 4 100 03/08/13 9.5
NP-2975 Set of above Five Punches in Pouch.

Transfer Punch Set

Features:

  • Heat treated and tempered for long life.
  • Set consists of 28 Punches sizes 3/32” to 1/2” by 64ths plus handy 17/32” size. Length 4-7/8”.
  • 1/2" to 1" lenght 5-1/4"
  • Diameter .0025 under size to facilitate use.
  • Black Oxide Finish.
  • Comes with indexed Stand.
  • Ideal Punch set for transferring of threaded, drilled and tapped holes. Very popular with Tool  Makers and Machinists.


Specifications:

 

Cat No. Description
TP-3010 28 PCs Transfer Punch Set. 3/32”  to 1/2"
TP-3011 28 PCs Transfer Punch Set. 1/2"  to 1"
Looking for Center Punches ?
© J. K. Industrial Corporation
 
Desktop Site Back to top